详情

Series M2 Tonearm

The Series M2 embraces three models the M2-9, M2-10 and M2-12 offering pivot-stylus dimensions covering virtually all turntable requirements.

These arms offer at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings etc., and a level of stiffness and rigidity to suit all types of cartridge.

These precision pick-up arms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance.

Series M2-12 has a pivot-stylus dimension of 308.8 mm (12.16”). Distortion caused by lateral tracking error is at least 25% less than possible with a nine inch arm. However effective mass will be typically 12.0 grams. Also, a turntable designed for 12-inch arms must be selected.

The internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.

Series M2-12Distance from pivot to stylus

308.80mm

Distance from pivot to turntable centre

295.60mm

Cartridge fixing centres

12.70mm

Overhang

13.21mm

Height above mounting surface

87.0mm max 63.0mm min

*Note Spacer P1, part no. 3823/IV is required when the turntable surface is more than 41.30mm above the surface on which the arm is mounted

Height of record surface above mounting surface

67.40mm max 43.40mm min

Depth below mounting surface

46.0mm

Radial clearance for balance weight

51.0mm

+ - Tracking adjustment

12.70mm