SHUNYATA RESEARCH

SHUNYATA RESEARCH
SIGMA Analog
(1.8M US C15)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Analog
(1.8M UK C15)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Analog
(1.8M US C19)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Analog
(1.8M UK C19)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Digital
(1.8M US C15)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Digital
(1.8M UK C15)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Digital
(1.8M US C19)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA Digital
(1.8M UK C19)

$ 20,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$ 930.00 ***

SHUNYATA RESEARCH
SIGMA HC
(1.8M US C15)

$ 28,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$1,340.00 ***

SHUNYATA RESEARCH
SIGMA HC
(1.8M UK C15)

$ 28,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$1,340.00 ***

SHUNYATA RESEARCH
SIGMA HC
(1.8M US C19)

$ 28,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$1,340.00 ***

SHUNYATA RESEARCH
SIGMA HC
(1.8M UK C19)

$ 28,000
ΞTRON™ Σ SIGMA Series of power cords are the most technically advanced products of their kind, incorporating multiple technologies that showcase Shunyata Research’s pioneering work in the area of Distributed Power Conditioning. Σ SIGMA power cords work far more efficiently than traditional power conditioners because they intercept noise at its very source -- the component power supply, and prevent it from being shared with other electronics in the system via CCI (Component-to-Component Interference).

DEFINING FEATURE
The defining feature of each Σ SIGMA power cord are Shunyata’s highest performing ΞTRON™ circuits, which measurably reduce noise at the first point of electrical contact with component power supplies. No power conditioner in the world can capture noise at the first stage of a component's electrical circuit and isolate that noise from other components. This ultra-efficient means of noise reduction virtually eliminates CCI (Component-to-Component Interference) and protect electronics in the system from being affected by commonly shared noise.

Essentially, Σ SIGMA Series power cords function as independent, high-current power conditioners. All three Σ SIGMA power cord models cancel the specific frequencies of noise associated with the class of components they are designed for -- Digital, Analog or High-Current.

Σ SIGMA model power cords are entirely non-reactive. They present no interference or impedance challenge to electronic power supplies (Unlike most power conditioners). What this means is, Σ SIGMA power cords are complementary to all electronic power supplies within their named classification and allow all components to perform at peak efficiency both in terms of current delivery and lowered noise.

EXCLUSIVE PARTS AND CONSTRUCTION
Σ SIGMA DIGITAL and ANALOG model power cords are all constructed using Shunyata’s finest VTX wire formed into massive gauge conductors, making them compatible with high-current electronics, but the Σ SIGMA HC is uniquely designed for the world’s most demanding amps and power conditioners with an even larger 6 gauge conductor complement and unique internal construction. Each Σ SIGMA power cord is designed and tested for optimum delivery of DTCD (Dynamic Transient Current Delivery).

15 YEAR EVOLUTION
Every facet of the Σ SIGMA model construction has benefitted from designer Caelin Gabriel’s obsessive attention to detail, along with his fifteen years worth of patented science, technology and parts development. Without question, the finest examples of Shunyata’s reputation as the world’s finest manufacturer of electrical and signal systems are the Σ SIGMA power cords -- the most technically advanced products of their kind.

*** Extra Length PER 1/4M HK$1,340.00 ***

SHUNYATA RESEARCH
ALPHA Analog
(1.8M US C15)

$ 8,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$ 400.00 ***

SHUNYATA RESEARCH
ALPHA Analog
(1.8M UK C15)

$ 10,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$ 480.00 ***

SHUNYATA RESEARCH
ALPHA Analog
(1.8M US C19)

$ 8,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$ 400.00 ***

SHUNYATA RESEARCH
ALPHA Analog
(1.8M UK C19)

$ 10,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$ 480.00 ***

SHUNYATA RESEARCH
ALPHA Digital
(1.8M US C15)

$ 8,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$400.00 ***

SHUNYATA RESEARCH
ALPHA Digital
(1.8M UK C15)

$ 10,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$480.00 ***

SHUNYATA RESEARCH
ALPHA Digital
(1.8M US C19)

$ 8,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$400.00 ***

SHUNYATA RESEARCH
ALPHA Digital
(1.8M UK C19)

$ 10,000
Superior Performance - Objectively Measured Results
The ΞTRON™ α ALPHA Series of power cables represent a new concept in power delivery. Three, similarly priced power cables, that are optimized for different types of audio components. One specifically tuned for digital type components that emit ultra high frequency noise. Another designed specifically for analog type components that have linear power supplies. And the third designed for high-current draw components such as high power amplifiers.

The ΞTRON™ α ALPHA ANALOG power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any analog component in a sound, recording or video system. The ΞTRON™ α ALPHA ANALOG is tuned specifically for the rectifier induced noise pulses generated by linear power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

There have been many power cords that claim to reduce power line noise. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

The ΞTRON™ α ALPHA ANALOG power cord delivers a dramatic reduction in measured noise without any side-effects, leading to clearer visual images and better sound in every conceivable analog application!

The ΞTRON™ α ALPHA HC power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any high current component in a sound, recording or video system. The ΞTRON™ α ALPHA HC is tuned specifically for the massive impulse noise generated by very high current power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise.

The ΞTRON™ α ALPHA DIGITAL power cable has noise reduction capabilities so significant that they can be measured with a power analyzer. More importantly, even a brief evaluation will yield an unmistakable improvement in the performance of any digital component in a sound, recording or video system. The ΞTRON™ α ALPHA DIGITAL is tuned specifically for the ultra high Megahertz and Gigahertz noise generated by digital component power supplies. It delivers a dramatic measurable reduction in both component and power line generated noise. There have been many power cords that claim to be designed for digital electronics. Invariably they use ferrous metals (ferrite) or carbon impregnated insulations or just a common shield. Yet, none of these products can demonstrate actual measurements of their efficacy. These common solutions have obvious colorations such as dynamic compression and a dulling, or darkening of the sound.

*** Extra Length PER 1/4M HK$480.00 ***