Inputs: Wi-Fi Ethernet (M12 X-code 8-pin/RJ45/Optical)
USB-A and USB-C (front panel) (USB DISK, HDD etc.)
DSD: up to 512 / 22.6MHz
PCM: up to 768kHz
MQA Full Decoder
Analogue output: Balanced 4.4mm 4V RMS / UnBAL RCA 2V RM
Digital output: USB-C (front panel)
USB3.0 Type-A Socket x2 (USB2.0 compatible)
S/PDIF Optical (PCM up to 192kHz, 24-bit)
S/PDIF Coaxial (PCM up to 192kHz, 24-bit)
AES/EBU (XLR - single link, PCM up to 192kHz)
I2S via HDMI connector
Pinout: 1) Data - 2) Gnd 3) Data +
4) Bck + 5) Gnd 6) Bck –
7) Wck - 8) Gnd 9) Wck +
10) Mck + 11) Gnd 12) Mck –
13,14,15,16) DSD Enable; L=PCM, H=DSD
17) Gnd 18) 5V Power Enable Output; L=O , H=On
19) N/C 20,21,22,23) Gnd
SNR: <-106dB(A) @ 0dBFS (BAL/UnBAL)
THD + N: <0.0025%@0dBFS(BAL/UnBAL)
Power supply requirement: DC9V/2.0A, 12V/1.8A, 15V/1.2A*(centre pin+)
Power consumption: <0.5W idle, 14W max
Dimensions: 214 x 151 x41mm(8.4” x 5.9” x 1.6”)
Net weight: 1.0 kg (2.26 Ibs)
Limited Warranty: 12 months
** *A power supply unit must be able to deliver minimum rated repetitive current
**12 months typical or as permitted/required by local reseller laws
***Speci¬cations are subject to change without notice
Blue Point Special EVO III (Low)
All the great attributes of the original BPS EVO III are also available in a low-output version that offers superior dynamics and faster response time. The low-mass coils take some of the pressure off the cantilever suspension system to allow the assembly to squeeze out every last drop of performance from this esteemed cartridge.
DS 003 Optical Cartridge
Signal output Photo-electric Conversion
Channel separation 27dB more（1KHz）
Output signal level 70mV (1kHz cartridge output)
Body material Aluminum(A5052)
Cantilever holder material Stainless
Needle pressure 2.0g～2.2g(2.1g is recommended)
Stylus Line contact
DS 003 Equalizer for Optical Cartridge
Output voltage 500mV(1kHz Equalizer output)
Output impedance RCA 120Ω
Pre amp input impedance More than 10kΩ
Input terminal RCA terminal
Output terminal RCA terminal×2
IInput USB3.0 B Socket
Formats DSD256/128/64, Octa/Quad/Double/Single-Speed DSD DXD(384/352.8kHz), PCM(384/352.8/192/176.4/96/88.2/48/44.1kHz) MQA
DAC Bit-Perfect DSD & DXD DAC by Burr Brown
Output Audio RCA (SE) — 2.1V fixed
1V / 3.3V max. (variable)
4.4mm Pentaconn (BAL) — 4.2V fixed
2V / 6.2V max. (variable)
Zout <= 200 Ohm (BAL)
<= 100 Ohm (SE)
SNR < -116dB(A) @ 0dBFS (BAL/SE)
DNR > 116dB(A) @ -60dBFS (BAL/SE)
THD+N < 0.0015% @ 0dBFS (BAL/SE)
Output Power (@1% THD) 4.4mm Pentaconn (BAL)
330mW@32 Ohm; 6.6V@600 Ohm;
16 Ohm - 600 Ohm Headphone
6.3mm S-BAL (SE)
230mW@32 Ohm; 3.3V@600 Ohm
16 Ohm - 600 Ohm Headphone
Note: Using 5v power. If powered from USB, power output may vary.
Output Impedance < 1 Ω (BAL/SE)
THD & N < 0.005% (125mW @ 32R)
SNR > 113dBA (6.2V BAL/3.3V SE)
Power consumption < 1.5W via USB power OR 5v DC (power supply not included)
Dimensions 160(w) x 117(d) x 35(h) mm
6.3" x 4.6" x 1.4"
Weight (Gross) 0.8 kg (1.8 lbs)
Warranty period 12 months
Power DC 5V
Input Bluetooth 5.0TM with AAC, aptX, aptX HD, aptX Adaptive, aptX Low-Latency, LDAC, HWA/LHDC Codec
Output Optical/Coaxial, Audio RCA L/R, 4.4 Balanced Line out
Frequency Response 20Hz – 20kHz <+0/-0.5dB (44.1kHz)
1Hz – 44khz <+0/-3.0dB (>= 88.2kHz)
Output Voltage @ 0dBFS 2.05V (+/-0.05V)
Dynamic Range 109dB (A)
Signal/Noise ratio 109dB (A) @ 0dBFS
THD & N @ 0dBFS < 0.0015% 10k Load
Output Impedance < 50Ω
Power Consumption < 2.5W
Dimensions 160(w) x 107(d) x 35(h) mm
6.3″ x 4.2″ x 1.4″
Weight (Gross) 0.8 kg (1.8 lbs)
ifi Power Cable --Nova
Nova is the power cable for those starting out on their journey into the exploration of the impact of mains upon their audio systems.
Meet the Nova, a truly geometretrically-balanced cable designed for the starter audiophile.
Bringing elements of design from the SupaNova,the Nova also provides iFi's Ground Zero Design to creat central core free of any magnetic fields.
Combined with the shotgun ground, non-twisting and constant impedance, the cable achieves maximum protection from any magnetic field and has nil induction voltage.
The result is vastly reduced system noise.
The cable is built upon the same pure copper for excellent conducitivty, impact resistant
polymer casing for increased durability, and gold-pated pure copper connections for the best transmission possible.
All in all, the Nova cable offers exceptional sonic price/performance for the most discerning yet affordable system.
Operation Voltage: 90V- 265V
Weights: 580g (1.28lbs)
**Specifications are subject to change without notice.****
The SupaNova is an endgame power cable for your audio set up. Featuring
our Active Noise Cancellation2 technology.
Actively eliminating noise across all frequency ranges across live, neutral and
earth, the cable is truly geometrically balanced, a first in the world of power
Using iFi audio's unique "Ground Zero" design technology, the cable creates a
central core that is free of any magnetic fields.
The non-twisted central ground wire is surrounded by the live and neutral
conductors as a geometrically-balanced pair double helix which protects the
ground wire from any magnetic field. No induction voltage is created in the
ground wire and therefore system ground noise is vastly reduced.
Each individual power line has concurrent shielding, so both internal and
external RFI noises are minimised.
Low inductance, low capacitance and constant impedance are achieved for
the entire cable by the use of the double circular helix power lines.
Constant impedance is achieved regardless of whether the cable is bent or
angled, thanks to the fully symmetric and balanced geometric design.
The cable is insulated using a polymer matrix, which is comprised of a
high-performing thermoplastic that is moisture-resistant and is ROHS compliant.
Continuing the true balanced theme, the cable uses air-dielectric delineation
to give the best separation possible between the two balanced pairs of live &
iFi audio uses the purest copper core to ensure excellent conductivity and our
plugs are gold-plated with copper connectors to guarantee the best possible
connectors. Finally, the cable is finished in an impact resistant ,polymer casing for long lasting durability.
Noise reduction: >40dB(>100x)
Surge Protection: max, 10,000A@775v/8/20us
Under operation voltage: Maximum operation rating 10A
at 250Vac and 15A at 125Vac
Lengths: 1.8m (70.8")
Weights: 675g (1.49lbs)
The ‘magic’ of tubes from solid-state.
Our Class A TubeState® technology is the result of nearly four decades of research of our Chief Designer, Thorsten Loesch, on tube and transistor gear.
The key is not to add distortion, but to avoid certain types of distortion. Once it is understood that specific distortions are endemic to solid-state circuitry and are pernicious with respect to subjective sound quality, we eliminate these from solid-state circuitry, without adding on tube-like distortion and noise.
Read more in our Tech Note.
Precisely match up LP equalisation!
Listen to vinyl recordings in the original and correct way. When so much is invested in an audio system, to leave out the final few percent of correctly matching the equalisation to the LP is almost sacrilege.
Our list of LP recommendations with their precise EQ curve will show you how using the correct EQ curve makes one heck of a difference! We reckon you probably have some of our picks in your collection.
Discover more about the history of recordings and EQ curves here.
Look, mum. No output coupling capacitor.
Direct Drive Servoless® is an important element of the audiophile experience, which is not visible in measurements but is quite audible.
Unlike a standard phono stage design, the iPhono3 Black Label continues the special design tradition of being direct coupled (i.e. no coupling capacitor) from cartridge to output and it does so without requiring a conventional DC servo.
In the iPhono3 Black Label the unique DC-Infinity circuit boosts the circuits DC gain to approach infinity (it is approximately 1 trillion one million times one million; 1012).
Once the feedback loop is closed, this near-infinite DC gain cancels all offset voltages to deliver a direct-coupled output with 0V DC offset. The key to the DC-Infinity circuit is that it only changes the gain below approx. 0.01Hz, while leaving the AC behaviour of the circuit at higher frequencies unchanged, injecting neither noise nor distortion into the audio signal.
Any noise and distortion of the DC-Infinity circuit happens at the same signal level as the output signal and is by design around 100 times less than the noise and distortion of the actual amplifier circuit, so compared to the actual phono stage noise and distortion it effectively disappears.
Nichion audio-grade capacitors, Panasonic OSCON/ECPU capacitors, MELF resistors, TDK C0G capacitors…the list goes on.
The iPhono3 Black Label is jam-packed. Take a look at its internals. Read more here.
Brand new power supply tech to power the iPhono3 Black Label.
iPower X. What’s not to love?
Frequency Response 10Hz – 100KHz (±0.3dB) 20Hz – 20kHz (±0.2dB)
Dynamic Range MM (36dB): > 108dB (A-weighted) MC (60dB): > 106dB (A-weighted)
Signal-to-Noise Ratio MM (36dB): > 85dB (A-weighted re. 5mV) MC (60dB): > 85dB (A-weighted re. 0.5mV)
Overload Margin MM (36dB): > 26dB (re. 5mV, @ 1% THD) MC (60dB): > 22dB (re 0.5mV, @ 1% THD)
Crosstalk <-71dB (1KHz)
Maximum undistorted output 7V (Load >= 600 Ohm, THD <=1%)
Total Harmonic Distortion (THD) <0.005% (MM 36dB 1V out 600R Load)
Output Impedance <100Ω
Input Voltage AC 100 – 240V, 50/60Hz
Power Consumption < 5W. Use with iPower X (15v) do NOT use any other power supply.
Dimensions 6.2' x 2.3' x 1.1' / 158 x 58 x 28 mm
Weight 0.58 lbs / 265 g
THE ION-001 IONIZER RETRICTS THR GENERATION OF OZONE BY CONTROLLING THE POWER SUPPLY VOLTAGE PROPERLY, AND IS DISIGNED TO HAVE A CONCENTRATION OF 0.01 PPM OR LESS. THEREFORE, THERE IS NO CONCERN SUCHNAS OXIDATION BY OZNE.
THE IONIZER ITSELF HAS A LIFETIME (APPROXIMATELY)AMOUNT OF IONS AFTER 10,000 HOURS OF USE). PLEASE TURN OFF THE POWER WHEN NOT USING THE IONIZER, IT TAKES ABOUT 10 YEARS TO USE 10,000 HOURS FOR 3 HOURS EVERY DAY.
THE CHARGE DEGREE OF THE RECOORD DIFFERS DEPENDING ON THE ENVIRONMENT SUCH AS TEMPERATURE AND HUMIDITY .
DO NOT PUT YOUR FINGER OR STICK INTO THE IONIZER OULTET AS IF MAY CAUSE A MALFUNCTION.
SIZE: 84MM X 84MM X 250MM
INPUT VOLTAGE: DC12V (AC100V-240V0
NUMBER OF IONIZERS: POSITIVE (+) ION X 2 NEGATIVE (-) X 2
AMOUNT OF OZONE: LESS THAN 0.01PPM
The Black Pearl incorporates a tried and reliable cartridge body with an improved cantilever and the same spherical stylus as the Oyster. This combination gives an overall richer output, including greater channel separation and a wider frequency response that pushes the listening experience to the next level.