Premier Line/Phono (Formerly 1.0)

$ 30,600
Quantity:
+
Description

Audion Premier Line level with moving magnet phono stage pre-amplifier is built on a quality substrate pcb (printed circuit board) as with all our amps they are hand built. The chassis is black powder coated aluminum as is the transformer cover. The top plate and badge are mirror finished stainless steel.


The Audion Premier line / phono pre-amplifier 1.0 is an active class A device. Built with 4 line level buffered inputs and an MM phono stage, switched from the front panel, 2 line outputs and a direct un-switched tape output. This pre-amp has the benefit of our MM phono stage as above included.

The soundstage is extremely fluid and controlled. Roll off in both directions is seamless. Resolution is astounding, with absolutely convincing depth even at very low playing levels. It brings recording to life and places you directly in front of the performance. The phono stage is exactly the same as our stand alone version and is of a step up transformer less design, meaning it is incredibly fast and fluid.

Sensitivity variable
>1.1V Line, 2 mV Phono
Phase
Correct Gain: 46db
Distortion @ 1V
<0.010% No Feedback
Noise CCIR)
<100db <80db Phono
Signal to Noise
>70 db
Frequency Response
11 – 165KHz ±1 db RIAA
Inputs
4 Line Level, 1 x tape, 1 x Phono
Outputs
2 Main Out, 1 tape
Consumption
12 Watts
Tubes
4 x 6H23N or E88CC
Size -
42cm deep, 23cm tall and 16cm tall - Less tubes
Weight
7.5kgs
Fuses -
Power 500mA / 240V