IFI

Phono 3

$ 1,999
• 支援從 36dB 到 72dB 的四種 MC/MM 增益選擇和四種輸入阻抗設置,確保與各種唱頭相容

• 與典型的低音衰減濾波器不同,具有智慧亞音速濾波器,可僅有效消除由扭曲引起的超低頻,而不是由音樂引起的超低頻

• 此唱放級的 EIN(等效輸入噪音)為 -151dBV,比某些 A+ 類型號高出 20dBV,確保超靜音底噪

• 精確的 RIAA 具有平衡輸出,性能可與 1,000 美元的唱頭放大器媲美

• 內部高科技1.2MHz潔淨電源,可媲美經典電子管放大器的LC濾波電路

Dac 3

$ 1,799
• 支援高達 PCM 768kHz、DSD512 和 MQA 的所有高解析度音樂格式

• 配備 USB-C 輸入,實現即插即用連接

• 提供 6.3 毫米單端和 4.4 毫米平衡耳機輸出,為各種頭戴式耳機和耳機提供高達 390 mW 的功率

• 具有 RCA 和 4.4 毫米平衡輸出,具有可變和固定音量設置,可無縫連接到主動揚聲器、前級放大器或功率放大器

• 包含 XBass+,可恢復開放式耳機遺失的低音頻率

• 配備 PowerMatch,可切換增益,以確保您所使用的耳機獲得最佳功率

• 改進的低抖動 GMT(全域主計時)時鐘可提供 >20dB 的更好效能

• 改進的電路(包括增強的直流偏移)可確保提高訊號純度和精度

• 整合 16 核心 XMOS 低延遲微控制器,用於 DSD512 和 MQA 全解碼

Signature Bundle Set (HFM)

$ 4,399
The ZEN DAC Signature V2 and ZEN CAN Signature HFM with 4.4mm Balanced cable make a tasty treat for your desktop.

The ‘ZEN Signature Set HFM’ comprises both the ZEN DAC Signature V2, the upgraded version of our original ZEN DAC Signature, and the new ZEN CAN Signature HFM.

The ZEN CAN Signature HFM has an unique EQ curve that brings out the best in the already outstanding HIFIMAN range of headphones.

This set includes a high-performance 4.4mm Balanced cable to connect them together.

Signature Bundle Set (MZ99)

$ 4,399
The ZEN CAN Signature MZ99 has a carefully calibrated EQ curve to compliment the Meze 99 Classics. It adjusts the treble for more ‘vivaciousness’ and enhances the mid-low bass to extract the last drop of sonic goodness from these already musical headphones.

Its custom ActivEQ setting combines active and passive components to create this special EQ curve. Take a look at the Meze Curve & Compatibility chart here.

The ZEN CAN Signature MZ99 also works with the Meze 99 Neo and the Meze 99 by Drop. ActivEQ can be switched off to make the most of ALL headphones and in-ear monitors.

The ZEN CAN Signature MZ99 also uses XSpace. This is an analogue processing mode which compensates for the ‘in-head localisation’ effect that can occur when listening totracks mixed using a pair of speakers on headphones.

It features PowerMatch – four gain in six dB steps – 0dB, 6dB, 12dB and 18db.

The ZEN CAN Signature MZ99 boasts symmetrical, dual-mono balanced circuitry. It delivers 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 600 ohms or more through the balanced output.

It houses stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Balanced input. It has a 6.3mm output for headphones that have a standard single-ended connector and a 4.4mm Balanced balanced output for headphones offering a balanced connection.

Zen Stream

$ 3,199
Wi-Fi audio transport

ZEN Stream is a true ground-up design by iFi — the hardware and software implementation is quite exceptional:

Two SuperSpeed USB3.0 ports with Active Noise Cancellation II
S/PDIF out with the iPurifier built-in
iFi software developed with Volumio open-source as the starting point, then coded and optimised by us to achieve the purest streaming software bar none
These are some of the factors behind why the ZEN Stream is at the cutting-edge handling PCM384/DSD256 on LAN and WiFi (802.11n, with 100Mbps on 5Ghz).

Zen One Signature

$ 2,799
Only DAC you’ll need (Bluetooth + USB + S/PDIF)

The ZEN One Signature is the first ZEN DAC to support all hi-res: DSD256, PCM384, MQA384kHz, Bluetooth 96KHz.

96kHz Hi-Res Bluetooth: LDACTM, HWA/LHDC, aptX Adaptive/HD/LL, AAC
USB audio using 16 Core 2000MIPS XMOS low latency microcontroller (MQA decoder)
Fully balanced 4.4mm output
Purity of design, no headphone amp, no volume control. The ultimate DAC for all your home audio sources.

*LDAC and LDAC logo are trademarks of Sony Corporation.

Zen One Signature

$ 2,399
For IEMs and headphones with audiophile-grade components for superior sound.

The ZEN CAN Signature offers a range of input options, including stereo RCA, 3.5mm single-ended, and 4.4mm balanced inputs, making it versatile enough to connect with your laptops, phones, or DACs.

For output, it provides a 4.4mm balanced option for headphones that support balanced connections. It also features a 6.3mm jack for headphones with standard single-ended connectors. If you’re using earphones with a 3.5mm plug, a 3.5mm to 6.3mm adapter is available, so there’s no need to worry.

The unit also includes an analogue balanced output on the back panel, ideal for connecting active speakers via a 4.4mm to XLR adapter. As the ZEN CAN Signature is fully balanced and dual-mono circuit design, this is the recommended output option.

Zen Dac V2

$ 1,399
Our super-affordable compact DAC/headphone amp just got even better.

A new and improved low jitter, crystal clock means >20dB better performance. The super-low noise performance means the ZEN DAC V2 will remain quiet even in noisy situations such as yachts or RVs.

The balanced design for the analogue stage – rare and not found at this price point – makes it pretty special and delivers the best sound quality, normally found in higher pricedmodels.

The ZEN DAC V2 sports Balanced 4.4mm outputs at both the front and back. On the front, there’s also the popular 6.3mm headphone socket.

Zen Can

$ 1,299
Fully-balanced. Maximum 1,600mW. Battleship headphone amplifier.

The ZEN CAN has trickle-down Class A discrete balanced circuitry from iFi audio’s US$1,699 flagship Pro iCAN. With 15.1v @300 Ohms on tap, it has serious power that will make even difficult-to-drive headphones thump to the beat.

Class A discrete output buffer from the flagship Pro iCAN using Op-Amp (OV2637A)
FET input avoids loading volume control – low distortion/noise
SE inputs (1M Ohm) ensures loading of the source so always in Class A operation
Output amplifier gain of four steps in +6dB perfect for headphone matching

Zen Blue V2

$ 1,199
暫時沒有庫存!

我們的超實惠高解析度藍牙® DAC 變得更加出色!

對 ZEN Blue V2 的音質充滿信心。

它使用最新版本的Bluetooth5.0®和最新的Qualcomm 5100晶片來處理所有傳入的Bluetooth®資料。 ESS Sabre DAC 晶片可確保極為流暢的數位類比轉換。

使用 ZEN Blue V2 消除標準的「藍牙藍調」。

Zen Air Blue

$ 799
The ZEN Air Blue supports any current Bluetooth stereo audio codec (signal) available on the market today.

AAC – better than SBC, widely used, found in Apple devices
aptX HD, aptxLL and aptX Adaptive – variations on an improved aptX
aptX – better than SBC, widely used, found in Android devices
LDACTM – extremely high quality, designed by Sony
LHDC – extremely high quality, designed by Huawei
SBC – standard Bluetooth used by most audio devices
Whatever device you are are using for streaming music via Bluetooth, we’ve got you covered.

*LDAC and LDAC logo are trademarks of Sony Corporation.

Zen Air Dac

$ 799
The ZEN Air DAC supports different file formats – PCM 32bit/384kHz, fully native DSD256 and MQA.

PCM – Pulse Code Modulation is the file format used in CD, DVD, Blu-ray and other digital audio applications. It’s the next step up from MP3.

DSD – Direct Stream Digital is a very high-quality audio format, better than CD quality. The higher the number (sample rate), the better the recording – DSD64, 128, 256, 512 and 1024. Fully native means that it hasn’t been altered in any way from the original recording.

MQA – Master Quality Authenticated is an award-winning audio technology that enables music fans to stream the original master recording into their home, car or their mobile. With the ZEN Air DAC you can listen to MQA straight out of the box. Simply connect to Tidal Masters and check the option to stream MQA.

Zen Air Can

$ 799
Enjoy a louder, clearer listening experience from your PC, Mac, Streamer or TV.

The ZEN Air CAN has two different headphone sockets – 6.3mm single-ended and 4.4mm S-Balanced.

There are basically two types of headphone – single-ended and balanced. In a nutshell, single-ended is the most common but the balanced option is often considered the better as it offers more power and control of the headphones.

At iFi, we know not everyone has balanced headphones, so we’ve created our S-Balanced technology. This gives you all the benefits of a balanced connection – lower noise, less crosstalk – but without the need for balanced headphones.

Zen Air Phono

$ 799
Our super affordable phono stage makes your vinyl sound purer than ever.

There are two kinds of turntable cartridge – Moving Magnet and Moving Coil – and the ZEN Air Phono works with both of them.

The MM setting is for cartridges with an output voltage of 2mV and higher.

The MC setting for outputs less than 2mV.
You use the gain switch on the rear to change this setting.

It also has a precise RIAA equalisation setting to satisfy the most demanding vinyl lover.